Barracuda Motorcycle Relay CAN-BUS RELAY For LED Indicators Scelto Dai Clienti

Descrizione

The CAN-BUS RELAY BARRACUDA is an essential electronic component for the correct operation and flashing of the direction indicators on most vehicles equipped with the CAN-BUS system.
The CAN-BUS RELAY provides an electrical load necessary for the correct operation and flashing of the BARRACUDA LED INDICATORS through the combination of the appropriate Switches.
Up to 2 channels can be operated, for example: the direction indicators in the Rear Left and direction indicators in the Rear Right.
The CAN-BUS RELAY BARRACUDA can also be used on vehicles equipped with original LED turn signals.
The following resistance values can be set:

• 150 ohm
• 170 ohm
• 200 ohm240 ohm300 ohm400 ohm600 ohm
• 1200 ohm
• Cable length = 200mm with 3mm Faston

Connections:

• Yellow = channel 1 input (+)
• Orange = output channel 1 (+)
• Blue = input channel 2 (+)
• Red = output channel 2 (+)
• Gray = ground in (-)
• Black = exit surface (-)

Connectivity: 1 CAN-BUS REALIS for 1 PAIR of INDICATORS.